Deleting Partitions - Quantum Scalar i6000 User Manual

Chapter 3: Configuring Your Library
Working With Partitions

Deleting Partitions

154
3 Navigate to the location of the drive firmware image file (with either
a.drv, .fmr, .img, .E, or .ro extension) you want to download, and
then click the image file to highlight it.
4 Click Open.
The download process copies the drive firmware image from the
remote file system to the MCB. When the download process
completes, the Partitions - Step 6: Configure Drive Firmware
Autoleveling dialog box appears again.
Caution: For the host application to have access to the written data
on the partition that you want to delete, you must recreate
a partition that includes the same media type, interface, I/E
station magazines, and a host at the same SCSI ID and LUN.
To delete a partition, perform the following steps:
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > Partitions > Configure.
The Partitions dialog box appears.
Quantum Scalar i6000 User's Guide