Setting Up Ipv6 Network Configuration - Quantum Scalar i6000 User Manual

Chapter 3: Configuring Your Library
Setting Up the Network Configuration
Setting up IPv6
Network Configuration
164
Port Settings on page 167.
The Cycle button enables you to cycle the external Ethernet
interface without rebooting the library.
3 Make the appropriate network configuration changes, and then
click OK.
A message appears that informs you that network connectivity will
be lost temporarily, and asks whether you want to proceed.
4 Click Yes.
1 After completing the steps listed in
on page 161, select Setup > Network
Configuration
Configuration > IPv6 Configuration.
the IPv6 Network Configuration dialog box appears.
2 Use the Static IP tab to disable or to enable and specify a static IP
address. Valid static IP addresses include link local, site local, and
global unchaste.
3 Click DHCP to display the DHCP tab.
Setting Up the Network
Quantum Scalar i6000 User's Guide