Drives Tab; Towers Tab - Quantum Scalar i6000 User Manual

Hide thumbs Also See for Scalar i6000:

Table of Contents

Quantum Scalar i6000 User's Guide

• State — Online or Offline.

• Serial number — Robot serial number.

• Version — Robot firmware version.

• Generation — Hardware generation (Gen 1 or Gen 2).

• Parked — Indicates whether robot is in its parking space (Yes or No).

If the robot is Gen 1, this will display as N/A.

• V Motion — Total number of meters of vertical motion traveled by

• H Motion — Total number of meters of horizontal motion traveled

by this robot.

• Media Moves — Total number of media move operations performed

by this robot.

Drives Tab

The Drives tab displays the following information about the library/

partition being viewed:

• Serial Number — The serial number of the drive

• Location — The coordinates of the drive within the library

• State — Whether the drive is varied on or off

• Partition — Which partition the drive is assigned to

The Towers tab only displays if a tower (HDEM) is installed in the library

and details the following information:

• Tower # — The location of the tower in the library

• Status — If the tower is available

• Mode — If the tower is online or offline

• Scanner — If a barcode scanner is installed or not

• State — Whether the tower is varied on or off

• Door Status - Whether the rear access door is open or closed

Chapter 15: Maintaining Your Library

Monitoring the Library