Config Button Alerts - Quantum Scalar i6000 User Manual

Figure 47 CONFIG Button -
Good/Saved
Figure 48 CONFIG Button -
Warning/Unsaved
Quantum Scalar i6000 User's Guide
Caution: It is the customer's responsibility to properly save the
library configuration. If a conpact flash fails and needs to
be replaced and the configuration was not saved properly,
the library will need to be completely reconfigured
manually.

CONFIG Button Alerts

To help you remember to save the configuration, the CONFIG button on
the LMC main console toolbar indicates whether you have saved the
current library configuration.
• Green Check Mark — Good. The current configuration has been
saved. This can mean you saved the configuration locally on the
library or to a remote location.
• Yellow Exclamation Point — Warning. The current configuration has
not been saved.
Note: If you have never saved the configuration, then the icon will
always show green/good, even if you change the configuration.
You can click the CONFIG button on the LMC toolbar to access the Save
and Restore Library Configuration dialog box.
Chapter 15: Maintaining Your Library
Maintenance Actions
577