Quantum Scalar i6000 User Manual page 549

Element
In the Drive(s) area:
Drive Type
drop-down list
State
Drive Type
Location
RAS
Quantum Scalar i6000 User's Guide
The following table describes the elements on the Drives dialog
box.
Description
Enables you to select the type of drives you want to list on the Drives dialog
box (for example, LTO1 for LTO-1 tape drives). All lists every drive in the
library.
The state of the drive (Varied On, Varied Off, or Pending [if in transition]).
The type of drive (for example, LTO2 - FC).
The location of the drive by means of a coordinate system. For information
about location coordinates, see
page 437.
The status of the drive as reported by the RAS system (for example, Good or
Failed).
Chapter 15: Maintaining Your Library
Understanding Location Coordinates
Maintenance Actions
on
535