Quantum Scalar i6000 User Manual page 417

Quantum Scalar i6000 User's Guide
4 If you are creating or modifying, configure the following the fields:
Field
Name
API Client Plug-in
Application IP/Host
Name
Application Port
Number
5 Click Finish.
A "success" dialog box appears.
Caution: If you get an error dialog box that says, "Failed to
validate the External Application," this may mean that
the IP address or host name is incorrect, or the server is
not responding or not configured. The library will
accept the settings you entered, but you should
double-check that all the information is correct and
modify it if necessary. If any of the configured
information is incorrect, successful communication will
not occur.
6 Click OK to close the dialog box.
Chapter 11: Configuring Access to StorNext
Description
Type a descriptive name you will use to
identify the external application.
Select the appropriate API client plug-in
from the drop-down list. The list contains
the API client plug-ins you installed in
2: Installing/Removing the Scalar i6000 API
Client Plug-in on page 398.
Type the IP address or DNS host name (if
DNS is configured) of the external
application server.
Note: To use a host name, DNS must be
configured on the LMC (Setup >
Network Configuration > DNS
Configuration).
Accept the default or type an external
application host server port number.
Step
403