Logging Off From The Touch Screen (Local Client) - Quantum Scalar i6000 User Manual

Logging Off From the
Touch Screen (Local
Client)
Quantum Scalar i6000 User's Guide
Note: User names and passwords are case-sensitive. Select the
Shift key to display uppercase letters and special
characters. This enables you to type one uppercase letter or
special character before the Scalar i6000 Logon dialog box
returns to displaying lowercase characters. To type more
than one uppercase character or special character, select
the Caps key. The Caps key toggles between displaying
uppercase and lowercase characters.
Note: Only one administrator at any given time can be logged on
to the library.
Note: If you want to log on using the default administrator
account (admin), and you do not remember the password,
contact Quantum Support to reset the password.
3 Position the cursor in the text box below the Name text box by
tapping it, and then type the password for the user or administrator
account.
Note: If you are logging on to the library for the first time using
the default administrator account (admin), type
password. After you log on, the library prompts you to
change the default admin password. You must enter and
confirm a new password. Passwords that are most secure
include a combination of letters, numbers, and non-
alphanumeric characters. Passwords must be eight or more
characters in length. The word "password" is not available
for use.
4 After you type a user name and password, select OK.
1 Select Operations > Log Off or select the Log Off button on the
toolbar.
A message appears that asks you whether you are sure that you
want to log off.
2 Select Yes.
Chapter 13: Running Your Library
Logging On and Off
413