Downloading New Drive Firmware - Quantum Scalar i6000 User Manual

Quantum Scalar i6000 User's Guide

Downloading New Drive Firmware

Before you install a new drive firmware image, you must download it to
the library's MCB from the remote client's file system. You must perform
the download from a remote client.
Note: Before you begin the following procedure, make sure that you
have obtained the new drive firmware image from Quantum
and placed it in an accessible location on your laptop.
1 On the Update Drive Firmware dialog box, click Manage Images.
The Manage Drive Firmware Images dialog box appears.
The library has enough space for 20 MB (with a maximum of 8
images) of drive firmware images.
If the check box for a drive firmware image is clear, you can delete
the image by clicking it to highlight it, and then clicking Delete.
2 To download a new drive firmware image, click Download.
The Select firmware image file to download dialog box appears.
Chapter 15: Maintaining Your Library
Maintenance Actions
567