Quantum Scalar i6000 User Manual page 587

Quantum Scalar i6000 User's Guide
• Types of media
• Storage magazine locations
• Number of I/E stations and magazine type
• Types of drives
• Drive locations
If you change the library's physical configuration in any of these areas,
you should initiate the configuration teach process (for example, when
you add or remove storage or remove storage to add another
component. The library will automatically perform a configuration
teach, calibration teach, and inventory when an expansion module is
added.
Note: The library automatically performs an inventory after it
completes the configuration teach process.
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Tools > Teach.
Note: If the physical library is not offline, you receive a message
that asks you whether you want to take it offline. Click Yes.
The Teach dialog box appears.
Configure is already selected by default.
4 Click Start.
During the configuration teach process, the picker moves to each
storage magazine, I/E magazine, and drive in the library and stores
Chapter 15: Maintaining Your Library
Maintenance Actions
573