Quantum Scalar i6000 User Manual page 162

Chapter 3: Configuring Your Library
Working With Partitions
148
that appears on the Partitions – Summary Information dialog
box.
Caution: After a media volume serial number has been
reported to a host, changing the Return Media
Identifier setting could cause the host to not
recognize media within the library.
For more information about how media policies work, see
Understanding Partition Media Policy Settings
• For Automatic Drive Cleaning, click either Enable or Disable. This
setting is enabled by default.
Enabling automatic drive cleaning allows the library to initiate drive
cleaning each time a drive requests a cleaning operation. For
automatic drive cleaning to function, you must first configure drive
cleaning for the library. For more information about configuring
drive cleaning, refer
Note: Automatic drive cleaning should be enabled for partitions
only if the host application does not support the
coordination of drive cleaning. If drive cleaning
functionality is enabled on the host application, do
enable automatic drive cleaning for any partitions in the
library.
8 To continue, click Next.
The Partitions - Step 3: Select Drives dialog box appears.
Note: If you are creating an Automated Media Pool (AMP) library
managed partition or an Active Vault library managed
partition, this screen is skipped because drives are not
allowed in these partitions. Go to
9 Select the location of one or more drives.
Make sure that you select the appropriate module because the
library can have drives in the control module and in any of the
expansion modules.
10 You can add a drive to the partition by selecting the appropriate
drive check box. You can delete a drive from the partition by
Configuring Drive Cleaning
Quantum Scalar i6000 User's Guide
on page 125.
on page 222.
not
Step 15.