Engine Control Module (Ecm) - Subaru IMPREZA 2004 Service Manual

Hide thumbs Also See for IMPREZA 2004:

Table of Contents

17.Engine Control Module (ECM)

1) Disconnect the ground cable from battery.

2) Remove the lower inner trim of passenger side.

<Ref. to EI-47, REMOVAL, Lower Inner Trim.>

3) Detach the floor mat of front passenger seat.

4) Remove the protect cover.

5) Remove the nuts (A) which hold ECM to bracket.

6) Remove the clip (B) from bracket.

7) Disconnect the ECM connectors and take out

B: INSTALLATION

Install in the reverse order of removal.

When replacing ECM, be careful not to use the

wrong spec. ECM to avoid any damage to the

fuel injection system.

Tightening torque:

5 N·m (0.51 kgf-m, 3.7 ft-lb)

Engine Control Module (ECM)

FUEL INJECTION (FUEL SYSTEMS)

Table of Contents