Engine Control Module - Subaru forester 2001 Service Manual

18. Engine Control Module

A: REMOVAL
S185049A18
1) Disconnect battery ground cable.
2) Remove lower inner trim of passenger side.
<Ref. to EI-38, REMOVAL, Lower Inner Trim.>
3) Detach floor mat of front passenger seat.
4) Remove protect cover.
5) Remove nuts (A) which hold ECM to bracket.
6) Remove clip (B) from bracket.
7) Disconnect ECM connectors and take out
ECM.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
When replacing ECM, be careful not to use the
wrong spec. ECM to avoid any damage to the
fuel injection system.
ENGINE CONTROL MODULE
S185049
G6M0095
EN0532
EN0533
S185049A11
FU(DOHC TURBO)-47
Fuel Injection (Fuel Systems)