Feed Roller Assembly - Star Micronics WinType 4000 Technical Manual

2.2 Feed Roller Assembly

[Disassembly]
Warning: Turn off the power switch and disconnect the power supply cord from the wall outlet.
Remove the EP toner cartridge and keep it in a safe place.
(1) Remove the following units:
• Top cover (Refer to section 1.2)
• Feeder assembly (Refer to section 2.1)
• Spring [1].
•
Pressing down on the feeder frame [3] of the feeder assembly, separately unhook the left and right
ends of the feed roller assembly [2] and remove it.
[Assembly]
Reverse the disassembly procedure.
REPLACEMENT AND ADJUSTMENT OF PARTS
Feed roller assembly [2]
[2]
[3]
– 31 –
Be sure that the power is disconnected!
[1]