Feed Solenoid - Star Micronics WinType 4000 Technical Manual

REPLACEMENT AND ADJUSTMENT OF PARTS

2.3 Feed Solenoid

[Disassembly]
Warning: Turn off the power switch and disconnect the power supply cord from the wall outlet.
Remove the EP toner cartridge and keep it in a safe place.
(1) Remove the following units:
• Top cover (Refer to section 1.2)
• Feeder assembly (Refer to section 2.1)
•
•
•
[Assembly]
Reverse the disassembly procedure.
When installing the feed solenoid [2] on the feeder assembly, align the hole in the stabilizing boss [4] on
Caution:
the feeder frame [5] with the hole on the feed solenoid. Tighten the screw while pressing down on the back
of the feed solenoid.
Screw [1]
Feeder solenoid [2]
Feed roller assembly [3]
[5]
[3]
[4]
– 32 –
[2]
[1]