12. Paper Feed Roller Assy
13. Frame Holder
GENERAL SPECIFICATIONS
(1)
Remove
Carriage unit as described in section 11
Four springs [1], [2], [6]
Four stop rings[7]
Two gears [3]
Two plain washer [4]
Two paper feed roller Assy [5]
(1)
Remove
Rear angle [1]
Carriage motor unit [2] as described in section 8
Home position detector [3]
Four roll pins [4]
Frame holder [5]
Note:
Roll pins [4] should not be used again once they
have been removed. Always use new ones.
– 41 –