5.
Print Head Unit
[ 2 ]
[ 1 ]
[ 3 ]
6.
Feed Motor Assembly
[ 1 ]
(1)
(2)
[ 4 ]
(3)
Note :Be careful to avoid damaging the heat elements when
[ 5 ]
(1)
[ 2 ]
– 32 –
Pull the pressure stay [1] forward to open the head
frame unit [2].
Slide the head clamp [3] in the direction indicated by
the arrow. Remove the print head unit [4].
Remove the head connector [5].
installing the replacement unit.
Remove:
Printer mechanism (See 3. above.)
Wiring band holding the lead wire.
Screws 2 pcs. [1]
Feed motor [2]