Retard Pad - Star Micronics WinType 4000 Technical Manual

REPLACEMENT AND ADJUSTMENT OF PARTS

2.5 Retard Pad

[Disassembly]
Warning: Turn off the power switch and disconnect the power supply cord from the wall outlet.
Remove the EP toner cartridge and keep it in a safe place.
(1) Remove the following units:
• Top cover (Refer to section 1.2)
• Feed roller assembly (Refer to section 2.2)
• Retard pad [1]
Press together the retard pad clips [2] on the back of the feeder frame [3] and remove the retard pad.
When removing the retard pad [1], do not to lose the spring [4] that is installed behind it.
Caution:
[Assembly]
Reverse the disassembly procedure.
[3]
[1]
[2]
[4]
– 34 –