Table of Contents
Advertisement
MAINTENANCE GUIDE
2.
ERROR/STATUS
This printer is able to detect 10 different printer error conditions. The error/status code corresponding to each one
is described below.
2.1 List of Error/Status Codes
Error/Status Code
U6
U2
U4
E5
E4
E3
E2
J3
P1
CX
*: "READY TO PRINT" is displayed every five seconds.
LCD Display
U6:POWER OFF
THEN ON AGAIN
U2:POWER OFF
THEN ON AGAIN
U4:POWER OFF
THEN ON AGAIN
CLOSE
FRONT COVER
E4:OPEN COVERS
CLEAR PAPER JAM
E3:OPEN COVERS
CLEAR PAPER JAM
E2:OPEN COVERS
CLEAR PAPER JAM
EP CARTRIDGE
NOT IN POSITION
FUSER PAUSE MODE
PAPER SIZE ERROR
– 76 –
Details
The non-volatile memory is malfunctioning.
The malfunction is related to the ROS.
The malfunction is related to the fuser.
The front cover assembly is open.
A paper jam has occurred in the exit sensor section.
(EXIT JAM)
A paper jam has occurred between the pre-regi. sensor
and the exit sensor. (PRE-REGI. JAM)
A paper jam has occurred between the input tray and the
pre-regi. sensor. (Very fast paper jam, Misfeed jam)
The EP toner cartridge is not installed.
A FUSER PAUSE command is being received in on-line
mode.
The paper size set in non-volatile mode differs from the size
of the paper that is being fed into the printer.
Advertisement
Chapters
Table of Contents
