Fan - Star Micronics WinType 4000 Technical Manual

1.5 Fan

[Disassembly]
Warning: Turn off the power switch and disconnect the power supply cord from the wall outlet.
Remove the EP toner cartridge and keep it in a safe place.
(1) Remove the bottom cover. (Refer to section 1.4)
(2) Disconnect PJ152 [1] attaching the HVPS to the fan [2].
(3) Inserting a miniature standard screwdriver [3] between the bottom cover [4] and fan [2], unhook the
latch and remove the fan.
[4]
[Assembly]
Reverse the disassembly procedure.
REPLACEMENT AND ADJUSTMENT OF PARTS
[1]
– 29 –
Be sure that the power is disconnected!
[2]
[3]