PARTS REPLACEMENT
2
1
3
1
7.
(1)
4
(2)
(3)
(4)
5
Note : Be careful to avoid damaging the heat elements
8.
(1)
2
– 40 –
Printhead unit
Remove the upper casing unit. (See 1. above.)
Pull the pressure stay 1 forward to open the head
frame unit 2.
Slide the head clamp 3 in the direction indicated by
the arrow. Remove the printhead unit 4.
Remove the head connector 5.
when installing the replacement unit.
Feed Motor Assembly
Remove:
Printer mechanism (See 3. above.)
Two tapping screws 1
Feed motor assembly 2