List Of P/J Connectors - Star Micronics WinType 4000 Technical Manual

MAINTENANCE GUIDE

4.2 List of P/J Connectors

The coordinates of the connectors (P/J) shown below correspond to 4.1 P/J Schematic Diagram.
P/J Coordinates
11 G12
12 G13
13 H13
14 H13
15 H12
16 H13
17 H13
18 H13
31 G13
32 G13
111 F12
112 D12
114 I4
121 F5
122 G5
123 H6
131 D4
132 E4
151 F12
152 F11
171 E11
181 F3
321 I10
Connects the MCU PWB to the LVPS assembly.
Connects the MCU PWB to the ROS harness assembly.
Connects the MCU PWB to the exit and thermistor harness assembly.
Connects the MCU PWB to the main motor.
Connects the MCU PWB to the HV harness assembly.
Connects the MCU PWB to the feed solenoid.
Connects the MCU PWB to the CRU harness assembly.
Connects the MCU PWB to the P/H harness assembly.
Connects the MCU PWB to Y-DEBUG.
Connects the MCU PWB to the LED harness assembly.
Connects the LVPS assembly to the MCU PWB.
Connects the LVPS assembly to the AC fuser harness assembly.
Connects the fuser assembly to the AC fuser harness assembly.
Connects the LD to the ROS harness assembly.
Connects the ROS motor to the ROS harness assembly.
Connects the SOS to the ROS harness assembly.
Connects the thermistor in the fuser assembly to the exit and thermistor harness
assembly.
Connects the exit sensor to the exit and thermistor harness assembly.
Connects the MCU PWB to the HVPS.
Connects the HVPS to the fan.
Connects the CRU sensor to the CRU harness assembly.
Connects the pre-regi. sensor to the P/H harness assembly.
Connects the LED PWB to the LED harness assembly.
– 90 –
Connections