Covers; Front Cover - Star Micronics WinType 4000 Technical Manual

1.

COVERS

1.1 Front Cover

[Disassembly]
Warning: Turn off the power switch and disconnect the power supply cord from the wall outlet.
(1) Grasping the left and right sides of the front cover [1], open it by pulling it down.
(2) Remove the EP toner cartridge and keep it in a safe place.
(3) Pressing down on the center of the printer with one hand, separately unhook the left and right hinges
[2] on the front cover [1] and remove the front cover.
[1]
[Assembly]
Reverse the disassembly procedure.
[2]
REPLACEMENT AND ADJUSTMENT OF PARTS
– 25 –
Be sure that the power is disconnected!