Printing Alignment - Star Micronics WinType 4000 Technical Manual

MAINTENANCE GUIDE
6.

PRINTING ALIGNMENT

A method for easily determining the alignment of the test pattern printed on letter-sized paper in test mode is shown
below.
Leave the paper in its original package in the environment where the printer is being operated for 12 hours and use
paper from a package that has just been opened.
Caution: Since there is no data in test print mode, the quality of an image cannot be used to evaluate the alignment.
(1) Lead Edge Registration Mark
(4.0 – 2.0mm) ≤ A ≤ (4.0 + 2.0mm)
B = B
Direction the paper is fed through the printer
A
B B
– 105 –