Paper Set Lever - Star Micronics WinType 4000 Technical Manual

2.4 Paper Set Lever

[Disassembly]
Warning: Turn off the power switch and disconnect the power supply cord from the wall outlet.
Remove the EP toner cartridge and keep it in a safe place.
(1) Remove the following units:
• Top cover (Refer to section 1.2)
• Feeder assembly (Refer to section 2.1)
• Spring [1]
• Paper set lever [2]
[Assembly]
Reverse the disassembly procedure.
REPLACEMENT AND ADJUSTMENT OF PARTS
– 33 –
Be sure that the power is disconnected!
[1]
[2]