Mac Address (System Serial Number) - Toshiba CTX100-S Programming Manual

MAC Address (System Serial Number)

This program enables you to display your CTX 670 System Serial Number.
Program Number(s): 909
Prerequisite Program:
Reference:
Access Sequence:
FB Name
MAC Address
)%
1. Press to view parameter. The MAC Address is view only and cannot be changed.
+ROG
2. Press (twice) to exit to the
3. Enter another program number to continue programming or press
mode.
Data Backup
This program enables you to Back up system data to a SmartMedia card.
Program Number(s): 910
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Backup Function
Numbers
Current Number
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
None
None
Login to programming mode from your telephone button pad:
+ROG    .
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB Summary
01 Display System Serial Number.
352*
= prompt.
"Format/Unmount SmartMedia"
None
Login to programming mode from your telephone button pad:
+ROG    .
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB Summary
01 Start and Stop system backup.
Note Restore function is not operational
and should never be executed.
Use System Initialize
900) Level 1 to restore system
backup.
02 The number of data blocks. This number
varies depending on the amount of
programming the system contains.
03 This number increments as the backup
progresses. When the backup is complete
this number should match the total number
of data blocks displayed in Numbers
()%).
Telephone Button Programming
Value
12 digits
+ROG
on page 13-103
Value
1:Backup
2:Restore (Do not
use. See Note on
(Program
left).
3:Cancel
Variable
Variable
900 Series Programs
LCD Prompt
MAC Address
again to exit programming
LCD Prompt
1:BACKUP
2:RESTORE
3:CANCEL
ALL NO=
CUR NO=
13-105