Toshiba CTX100-S Programming Manual page 147

Make sure you know exactly how many multiple DNs should be on each telephone before
Important!
using this wizard. After running the Multiple DN wizard, deletions or additions to Multiple
DN assignments must be made manually, one-by-one, for each telephone PhDN button and
Multiple DN hunt group. The wizard does not support changing existing Multiple DN
assignments in this version of CTX WinAdmin.
1. Click Station > SetUp
Wizard > Multiple DN.
The Multiple DN
Assignment Wizard
screen displays (shown
right).
2. Click Start. CTX
WinAdmin automatically
assigns the:
• Appropriate number of PhDN buttons onto the telephone. These operate as PDN buttons on the
telephone. PhDNs are assigned in sequence starting with the first button above the PDN.
If other buttons were installed in a PhDN location they will be overwritten.
CAUTION!
• Appropriate telephone as the owner of the PhDN buttons, starting with the PhDN you specified.
• PDN of the telephone as the name of the PhDN buttons.
• PDN and appropriate PhDNs of the telephone to the appropriate Multiple DN Hunt group, starting
with Hunt group number you specified.
The screen shown at right displays.
3. Based on your requirements, enter the
necessary fields.
The example on this screen shows that
Note
five buttons were entered. This assigns
the PDN plus four PhDNs on the
telephone starting with Key 1~Key 5.
4. Click Start to generate the request.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
Station
Setup Wizards
5-43