Toshiba CTX100-S Programming Manual page 357

Table 13-23 Programs 206 (continued)
Button Sequence
206-04 Display DN
A7# C‚yq
, n,
206-05 System Call Forward
A7$ C‚yq
, n,
206-06 VM ID Code
A7% C‚yq
, n,
206-09 Message Center
A7( C‚yq
, n,
206-11 Display Name
A7 C‚yq C‚yq
, n, ,
Program 207
Use Program 207 only for CTX software versions R1.03 and above.
Note
Assign the Feature button as a One Touch button using the following programs before using Program 207.
• Use Program 205 to assign DKT's feature button as a One Touch button
• Use Program 213 to assign the Add-on Module feature button as a One Touch button
• Use Program 215 to assign DSS Console feature button as a One Touch button
Button Sequence
207 Single Touch Button
Data Assignments
!& C‚yq
,
207-00 Primary DN
C‚yq
n,
207-01 Feature Key Number
A7 C‚yq
, n,
207-02 Registration Data
(See details below)
A7! C‚yq
, n,
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Value(s)
n = Up to 5 digits
n = 0~4 (CTX100)
0~10 (CTX670 Basic)
0~32 (CTX670 Exp.)
(default = 0)
n = Up to 16 digits
n = Up to 16 digits
n = Up to 16 digits
Value(s)
n = Up to 5 digits
n = 1~2860
n = Up to 64 digits
Telephone Button Programming
Summary
Enter the number displayed on the calling telephone that rings this
Phantom DN number.
This number is overridden by the number in Program 209, FB04 (if
assigned) and if the Phantom DN is in a hunt group. When calling
from this Phantom DN, the number displayed on the called telephone
appears in order of priority as follows:
This number in Program 209, FB04 (if assigned) and if the PhDN is in
a hunt group.
...or this number in Program 200, FB15 (if assigned).
...or the calling telephone's PDN.
Select the System Call Forward value.
Enter the voice mail box number that should answer calls when this
PhDN calls voice mail; or, when this PhDN is called and then forwards
to voice mail (This number is prefixed by codes in Program 579,
% %
~ ).
This VMID code is sent to the voice mail device in SMDI packets or
DTMF tones on direct calls to voice mail from the PhDN; and on calls
to the PhDN that forward to voice mail (see Program 580 for SMDI or
DTMF choice).
Note Do not enter a VMID code in this field if this PhDN is
associated with a PDN in a multiple DN hunt group (Program
%
209, ).
The associated PDN's VMID code (Program 200,
to voice mail.
Enter the Message Waiting Center DN, VM Pilot Number or lowest
member of VM hunt group.
Select radio button for user name to be included in the list display of
Large LCD (Directory Assistance).
Summary
Assigns timing parameters to Primary DNS.
Enter Primary DN of DKT.
Enter the feature number of the one touch button that registers the
operating data.
Registration of the operating data.
200 Series Programs
%
) will be sent
13-43