Toshiba CTX100-S Programming Manual page 393

Table 13-35 Programs 500~577 (continued)
Button Sequence
509-04 Override QPL
A7# C‚yq C‚yq
, n, ,
510 COS Override
Assignment
$( C‚yq
,
510-00 COS Override Index
C‚yq
n,
510-01 COS Override Code
A7 C‚yq
, n,
510-02 Set COS
A7! C‚yq
, n,
510-03 Set DRL
A7" C‚yq
, n,
510-04 Set FRL
A7# C‚yq
, n,
510-05 Set QPL
A7$ C‚yq
, n,
510-06 Set Network COS
A7% C‚yq C‚yq
, n, ,
512
SMDR for System
Assignment
$ ! C‚yq
,
512-01 Caller ID Field
A7 C‚yq
, n,
512-02 B Record for
Abandoned Call
A7! C‚yq
, n,
512-03 ANI
A7" C‚yq
, n,
512-04 Authorization Code
A7# C‚yq
, n,
512-05 End-of-Record CR
A7$ C‚yq C‚yq
, n, ,
513 SMDR for ILG
Assignment
$ " C‚yq
,
513-00 ILG
C‚yq
n,
513-01 Generate SMDR
Records
A7 C‚yq
, n,
513-02 DNIS Field Indication
A7! C‚yq
, n,
513-03 B Record for
Incoming Call
A7" C‚yq
, n,
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Value(s)
n = 1~16
(default =1)
n = 1~16
n = Up to 8 digits
n = 1~32
(default = 1)
n = 1~16
(default = 1)
n = 1~16
(default = 1)
n = 1~16
(default = 1)
n = 1~32
(default = 1)
n = 1. Enable (default)
2. Disable
n = 1. Enable
2. Disable (default)
n = 1. Enable (default)
2. Disable
n = 1. Enable
2. Disable (default)
n = 1. Enable (default)
2. Disable
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
n = 1. Enable (default)
2. Disable
n = 1. Enable (default)
2. Disable
n = 1. Enable
2. Disable (default)
Telephone Button Programming
Summary
Select the override QPL value.
Assigns Class of Service Overrides and their parameters (COS, FRL,
DRL, QPL).
Select the COS Override index.
Select the COS Override Code as entered by users. If no data is
entered in this field, any previously entered data is erased.
Select COS number for this override code.
Select DRL number for this override code.
Select FRL number for this override code.
Select QPL number for this override code.
Apply this override code to Network COS index
Assigns system-wide SMDR parameters.
Include Caller ID records in SMDR.
Generate B Record for an abandoned call.
Include ANI in SMDR record.
Include authorization codes in SMDR records.
Include a Carriage Return (CR) at the end of an SMDR record.
This program assigns SMDR parameters for ILGs.
Specify the ILG for which to set SMDR parameters.
Enable to generate records for this ILG
Check to include DNIS information in records for this ILG.
Enable B Record generation for incoming calls with or without
incoming SMDR being enabled.
500 Series Programs
13-79