Route Analysis - Toshiba CTX100-S Programming Manual

Services
LCR Guide Page

Route Analysis

Route Analysis chooses a Route Plan based on the dialed digits. The Routing Analysis Plan becomes the
index into the time/date calculations described in the next section. If the Strata CTX is unable to match the
dial string, it uses the default route plan which assures a route out of the system. If a match is found, Strata
CTX determines if a exception table is associated with the dial string. If the dial string appears in the
exception table, the call is assigned to the Route Plan stored in the exception table. Otherwise, the Route
Plan stored in the initial table is used.
Time of Day
The Strata CTX maintains time and day values for LCR separate from those for the general system. One
day can be divided into three zones, and each day can be categorized as a Weekday, Weekend, or Holiday.
Connection
Selection of a Route Choice Table begins the process of actually connecting the call to an outgoing trunk.
Each Route Choice Table consists of six Route Definitions which operate in terminal hunt fashion to select
an OLG and to apply a digit modification treatment.
LCR Guide Page
1. Complete the
Record Sheets"
2. From the Program Menu, click
Services > LCR Guide Page.
The Least Cost Routing Guide Page
screen displays (shown right).
3. Click on any Program Number to
start using the Guide pages.
Every Guide Page has Back and
Note
Next buttons to help you navigate
to the previous and next
programs in a group.
The Program at the end of a
group has a Guide Page button
instead of a Next button to take
you to the main Least Cost
Routing Guide Page.
9-16
"LCR Assignment
on page D-42.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03