System Call Forward Operation Status - Toshiba CTX100-S Programming Manual

System
System Call Forward

504 System Call Forward Operation Status

Prerequisite Program:
This command assigns System Call Forward (SCF) Type for the pattern.
F
IELD
00 SCF Number
01 Telephone Status
System Call Forward Copy
The copy function enables you to selectively copy SCF destinations to any or all SCF segments and any or
all SCF templates. It combines Program 500 and Program 504 on the same screen.
They were separate screens in previous versions of CTX WinAdmin.
Note
1. Select System > System Call Forward > a SCF template (1-32) and then a Telephone Status (example
"Busy No Answer"). The System Call Forward screen displays (shown above) showing the status of the
first available call forwarding system.
2. Select the needed values from the drop-down menus for the System Call Forward and Telephone Status
fields. These fields are required. As soon as the second field is selected, the full page displays for
editing.
If it is not yet configured, the Telephone Status field indicates No Forwarding.
Note
3. Select Call Type and Period by highlighting the desired line in the display.
4. Type the needed information into the Destination 1 and 2 fields. Destination 1 is always required,
Destination 2 is optional.
5. Click Submit to send the data to the CTX.
6. Click Submit to send the destination assignments to the CTX
...or click Copy to display the Copy dialog box. You can click on Copy at any time to copy Destinations
to any SCF template, Call type and period, including all SCF segments and templates.
4-16
None
D
ESCRIPTION
Select the SCF pattern number to configure.
Possible values: 1~4 (CTX100), 1~10 (CTX670 Basic),
1~32 (CTX670 Exp.), (default = no value)
Select the status or state in which the telephone should be for this system call
forward pattern to activate.
Possible values: No Data (default), Busy, No Answer, Busy No Answer or DND
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03