Toshiba CTX100-S Programming Manual page 391

Table 13-35 Programs 500~577 (continued)
Button Sequence
507-01 DDCB Equipment No.
A7 C‚yq
, xxyyzz,
507-02 Tenant Number
A7! C‚yq
, n,
507-03 Connection Status
507-04 Ring Duration
A7# C‚yq
, n,
507-05 LCD Name Display
A7$ C‚yq
, n,
507-06 Day1 Destination
A7% Tƒx… Ã
, n, , n1,
C‚yq
507-07 Day2 Destination
A7& Tƒx… Ã
, n, , n1,
C‚yq
507-08 Night Destination
A7' Tƒx… Ã
, n, , n1,
C‚yq C‚yq
,
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Value(s)
xx = Cabinet 01 (CTX100),
01~02 (CTX670 Basic),
01~07 (CTX670 Exp.)
yy = Slot 01~8 (CTX100),
01~10 (CTX670)
zz = Circuit 01~16
n = 1~2 (CTX100)
1~8 (CTX670) (default = 1)
n = 1. Enable
2. Disable (default)
n = 3~30
(default = 9)
n = 1~16
n = 1. None (default)
2. DN
3. Paging Group
1~4 (CTX100)
1~8 (CTX670 Basic)
1~16 (CTX670 Exp.)
n1 = Up to 5 digits
n = 1. None (default)
2. DN
3. Paging Group
1~4 (CTX100)
1~8 (CTX670 Basic)
1~16 (CTX670 Exp.)
n1 = Up to 5 digits
n = 1. None (default)
2. DN
3. Paging Group
1~4 (CTX100)
1~8 (CTX670 Basic)
1~16 (CTX670 Exp.)
n1 = Up to 5 digits
Telephone Button Programming
Summary
Enter the DDCB equipment number to which the Door phone should
be assigned.
Example: If the DDCB interface should be connected to a PDKU or
BDKU/BDKS in cabinet shelf 5, slot 2, circuit 3, enter 050203.
Notes
•
This is the cabinet, slot, and circuit number of the BDKU/BDKS or
PDKU interface PCB to which the DDCB is to be connected.
•
If a PDN is assigned to the DDCB equipment number it must be
deleted, using Program 201, before attempting to assign the
DDCB console.
Cabinet numbers:
•
CTX100 – Select 01 for Base and Expansion cabinet.
•
CTX670 – Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
•
CTX100 – Select 01~04 for Base slots and 05~08 for Expansion
slots.
• CTX670 – Select 01~08 for Base slots and 01~10 for Expansion
slots.
Select the Tenant Number for which the door phone should ring over
external page in the system Night mode.
Check the box if the door phone is physically connected to the DDCB.
Select the time that the door phone should ring destination devices
when the door phone button is pressed. The ring time can be 3 to 30
seconds set in 3 second intervals - each 3 second interval provides
one ring to the destination. Destination devices include selected DNs
and Page groups.
Enter the Door Phone name that should display on LCD telephones
when the door phone rings the telephones; or, when the telephone
calls the door phone.
1. Select Destination Type – Select the type of destination that
should ring when the door phone button is pressed during the
system Day1, Day2 or Night mode.
2. Enter the Destination Number – If the ring destination type is a
PDN or PhDN, enter the directory number. If the ring destination
type is Page, enter the Page Group number.
1. Select Destination Type – Select the type of destination that
should ring when the door phone button is pressed during the
system Day1, Day2 or Night mode.
2. Enter the Destination Number – If the ring destination type is a
PDN or PhDN, enter the directory number. If the ring destination
type is Page, enter the Page Group number.
1. Select Destination Type – Select the type of destination that
should ring when the door phone button is pressed during the
system Day1, Day2 or Night mode.
2. Enter the Destination Number – If the ring destination type is a
PDN or PhDN, enter the directory number. If the ring destination
type is Page, enter the Page Group number.
500 Series Programs
13-77