Ip Configuration - Toshiba CTX100-S Programming Manual

Telephone Button Programming
900 Series Programs

IP Configuration

This program enables you to set up Network Communication Protocols.
Program Number(s): 916
Prerequisite Program:
Reference:
Access Sequence:
FB Name
IP Address
Subnet Mask
Default Gateway
Notes
•
The LCD only displays three of the twelve IP address digits at a time. Press the
the remaining digits.
•
The IP Address is the static IP address of the Strata CTX processor NIC/Ethernet connection only. The
PPP IP address for the Strata CTX processor modem is always 192.168.255.254 and cannot be
changed.
)%
1. Press
Address 1, or press
+ROG
Press
2. Enter first IP Address Octet. To keep current setting go to
6SNU
3. Press
6SNU
4. Press
6SNU
5. Press
+ROG
6. Press
)%
7. Press
+ROG
8. Press
9. After all parameters are entered press
10.You are automatically returned to the
11. Enter another program number to continue programming or press
mode.
13-110
None
None
Login to programming mode from your telephone button pad:
+ROG    .
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB
01 Enter IP Address 1.
192 = First IP Address Octet
168 = Second IP Address Octet
254 = Third IP Address Octet
253 = Fourth IP Address Octet
02
Enter Subnet Mask Address 1.
03
Enter Default Gateway 1.
to view the current TCP/IP Address 1 (press
)%
to view Default Gateway Address 1).
.
button and enter second IP Address Octet. To keep current setting go to
button and enter third IP Address Octet. To keep current setting go to
button and enter fourth IP Address Octet. To keep current setting go to
.
to configure the remaining parameters.
.
Summary
)%
Step
+ROG
to submit the new settings.
= prompt.
PROG
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Value
0~255
default =  
0~255
default = 
0~255
default = 
6SNU
button to view
to view the current Subnet Mask
3.
Step
Step 5.
Step 6.
+ROG
again to exit programming
4.