System Call Forward Table View - Toshiba CTX100-S Programming Manual

Copy Dialog Box
To copy SCF Destinations to any selected SCF assignment
click Copy on the System Call Forward screen. The System
Call Forward Range Copy screen displays (shown right).
To select the Destination(s) that should be copied
1. You can remove a destination entry by removing the
checkmark from it.
2. Select the appropriate Period, Call type, Status and SCF
assignments to which the destination(s) should be copied.
3. Click Copy Now. Your entries are submitted to the CTX and
the destination(s) are copied to all assignments that you
selected.
Possible Errors
• If you attempt to remove Destination1 (only) when there is a
Destination2 assigned.
• If you attempt to assign Destination2 when Destination1 is not assigned.
Notes
• If you check "Prompt on Error," the copy function stops if one of the above errors occurs, then you are
given a choice to continue or abort. Continue skips the error and does not perform the copy.
• If you do not check "Prompt on Error," all errors, if any, are skipped and the copy is not executed.
• You can assign or remove both destinations at the same time without causing an error.

System Call Forward Table View

SCF Table View shows the entire set up of
all available system call forward levels.
To access the SCF Table View
Select System > SCF Table View.
See "Table Views"
functionality.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
on page 2-6 for table
System
System Call Forward Table View
4-17