Vmid Range - Toshiba CTX100-S Programming Manual

Station
Setup Wizards
The screen changes to the one shown at
right.
Important!
• This is a report that provides the Multiple
DN assignments that will be sent to the
CTX.
• Ensure that this information is correct
before you click Continue. You can change
the assignments by clicking Back.
5. Click Continue to generate results onto
CTX database.
To modify these entries later, you will
Note
have to use the appropriate individual program assignments.
6. Review the configuration screen. This is how
the multiple DNs are assigned in the CTX after
the wizard is done.
7. (Optional) To print the configuration results,
click Print.
8. To exit, select a command from the Program
pane.

VMID Range

This wizard reduces CTX programming time when you need to assign Voice Mail ID (VMID) codes. The
wizard will automatically assign specified VMID codes for a range of Primary DNs, PhDNs, and/or Pilot
DNs.
Specify the range of PDNs, PhDNs, or Pilot DNs that should have VMID code assignments. Then select
the VMID code assignment method.
The three code assignment methods are to assign the VMID to:
• Be the same number as the appropriate DN (PDN, PhDN or Pilot DN).
• Start at specific number and increment by one for each consecutive DN.
• Be the same number for all DNs.
In addition to the above assignments, specific digits including * and # can be added to the front and/or back
of each VMID. This is not for Stratagy codes 91, 92, etc., they are set in Program 579.
You can program a range of VMID codes for PDNs, PhDNs and/or Pilot DNs.
5-44
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03