Display Version - Toshiba CTX100-S Programming Manual

901 Display Version

Prerequisite Program:
This program enables you to view the Active and Standby software versions installed on the Strata CTX
system processor.
F
IELD
System Type
Active Software
Standby Software
DTMF, BBMS, BEXS,
BSIS, Ethernet, and
Modem
DREC Version
IPL Version
902 Set Time and Date
Prerequisite Program:
This program enables you to change the system clock in Strata CTX.
F
IELD
CTX Date
CTX Time
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
None
D
ESCRIPTION
Displays the system that is connected.
Possible values: CTX670, CTX100 (Active only).
Displays the software versions.
These fields indicate the following:
A = Indicates software for USA, Canada or Mexico.
Rx.xx = Indicates the CTX release level.
M0011.00 = The software version number.
Note The Active software does not always have to be the same as the Standby
software, although the Active and Standby software versions may be the
same when you receive it from Toshiba.
The check marks in these boxes indicate the hardware that is installed on the Strata
CTX processor.
Notes
• On the CTX100:
•
Ethernet means AETS is installed on ACTU.
•
Modem means AMDS is installed on ACTU.
• DTMF means ARCS is installed on ACTU.
Indicates the DTMF/ABR software.
Indicates basic boot-up software version.
None
D
ESCRIPTION
Set Strata CTXs current date.
•
Select current date (YYYYMMDD).
Possible values: YYYY = Year, MM = Month and DD = Day
•
Current Day of Week will display once the Year, Month and Day parameters
have been entered.
Possible values: Sunday ~ Saturday (Read only) (default = no value).
•
Leap Year will display based on the year entered.
Possible values: Leap, Leap Next x, where x = 1, 2 or 3. X. is the number of
years since the previous leap year (Read only) (default = no
value).
Set Strata CTXs current time (hhmmss).
Possible values: hh = hour, mm = minutes and ss = seconds (default = no value).
Operation
System Setup
10-3