Step 3C: Verify Modem Hardware Settings - Toshiba CTX100-S Programming Manual

Installation
Step 3: Set up Modem Connection (Optional)

Step 3C: Verify Modem Hardware Settings

Using the steps below verify that the modem hardware settings are set correctly to communicate with the
CTX built-in modem.
1. Go to Start > Settings (Windows 2000 only) >
Control Panel.
2. Click "Phone and Modem Options."
3. Click the Modem tab.
4. Select the modem used by CTX WinAdmin.
5. Click the Properties button.
6. Click the Advanced tab to verify hardware settings on
the screen (shown right).
7. Click OK and exit.
3-12
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03