Toshiba CTX100-S Programming Manual page 349

Table 13-16 Programs 203~204 (continued)
Button Sequence
204-09 Handsfree MIC
Setting
A7( C‚yq
, n,
204-10 Handsfree Tone
A7  C‚yq
, n,
204-11 Ext. Ring Repeat
A7 C‚yq
, n,
204-13 Ringing Line
Preference
A7 " C‚yq
, n,
204-14 Off-hook Preference
A7 # C‚yq
, n,
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Value(s)
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Idle
2. Ringing
3. Prime
4. No Preference
5. Prime and Idle
6. Prime and Ringing
7. Ringing and Idle
n = 1. CO Key
2. DN Key
Telephone Button Programming
Summary
If you call a station configured for Voice First signalling, you can use
this parameter to enable the called parties microphone from your
DKT.
If you call a DKT configured for Voice First signalling, you can use this
parameter to send a splash tone to the called party.
Enable repetitive ringing for incoming CO/PBX/Centrex signals.
Disabling this parameter defaults to standard CO ringing pattern
(1 second on/3 seconds Off).
Select Off Hook Preference.
When a digital telephone user goes off hook, presses the Spkr Button
or dials a digit while the telephone is idle (Hot Dial Pad), the
telephone will select an idle PDN or Line button, or answer an
incoming call, according to the preferences set in this command.
This command works in conjunction with the "14 PDN/Line
preference" and "15 Call Answer Preference" programs. The possible
values are described as follows:
•
Idle – The telephone will select and idle DN or Line button
depending on the "14 PDN or Line preference" choice. In either
case priority is always the lowest numbered button that is idle.
The telephone will not answer ringing calls automatically.
•
Ringing – The telephone will answer a ringing call (any PDN,
secondary DN, PhDN, or any Line type button) by call type or
longest ringing button depending on the "15 Call Answer
Preference" choice. The telephone will not automatically select a
DN or Line button when going off hook to originate a call.
•
Primary DN – The telephone will automatically try to select the
PDN button, if idle or ringing, no matter what the status is of other
buttons on the telephone.
•
No Preference – The telephone will not select any button when
the user goes off hook or presses the Spkr button. This selection
will also disable the telephone's Hot Dial Pad feature.
•
Primary DN and Idle – The telephone will automatically try to
select the PDN button, if idle or ringing. If the PDN is busy the
telephone will select an idle Line button (14 PDN or Line
preference - Line Preference) or another idle DN button (14 PDN
or Line preference - PDN Preference).
•
Primary DN and Ringing – The telephone will automatically try to
select the PDN button, if idle or ringing. If the PDN is busy the
telephone will select a ringing Line button (14 PDN or Line
preference - Line Preference) or a ringing DN button (14 PDN or
Line preference - PDN Preference).
•
Ringing and Idle – The telephone will always answer any ringing
call according to "15 Call Answer Preference" . If a call is not
ringing it will select and idle Line button (14 PDN or Line
preference - Line Preference) or idle DN button (14 PDN or Line
preference - PDN Preference).
Offhook preference button Type. Off hook ringing selections are also
based on "15 Call Answer Preference" choices.
•
CO Line buttons - Line buttons (any type CO, Pooled or Group
CO line button) have priority over DN buttons with "13 Off Hook
Preference" choices. The lowest numbered line button on the
telephone has priority over other line buttons for idle selection.
•
Primary DN button - DN buttons (any type PDN, Secondary DN or
PhDN button) have priority over Line buttons with "13 Off Hook
Preference" choices. The PDN button has first priority for idle
selection, the lowest numbered DN button on the telephone has
priority over other DN buttons for idle selection if the PDN button
is busy.
200 Series Programs
13-35