System Admin Log - Toshiba CTX100-S Programming Manual

Maintenance

907 System Admin Log

F
IELD
Search Result
907 System Admin Log
Prerequisite Program:
Use this command to Start/Stop the System Admin Log. When running this program, make sure to insert
the SmartMedia card into the appropriate slot.
1. Insert the SmartMedia Card into the
designated slot of the Strata CTX processor.
2. From the Program Menu, click Maintenance
> System Admin Log.
3. Click to Start or Stop the System Admin
Log.
4. Click the Checking System Admin Log
Completion Status button to view progress
of this operation.
Note When CTX670 stops logging data, it
automatically sends data to the
SmartMedia card. Run the Unmount
command (Program 908) before
removing the SmartMedia card to ensure complete data transfer.
Memory Access Operation
Prerequisite Program:
This program enables you to manipulate memory settings.
1. From the Program Menu, click
Maintenance > Memory Access.
2. Click the Read Memory or Write
Memory button to access memory.
3. Enter the memory Address to be
accessed.
4. Select size of memory to access (1~256,
default = no value).
5. Click one of the following buttons:
• New – click this button to create a
new Memory Access filename.
• Open – click this button to open an
existing Memory Access file.
6. Click Submit.
7. Click Save to save Memory Access file.
The Content box displays the contents of the memory address selected.
Note
11-6
D
ESCRIPTION
Search results are displayed in this field.
None
None
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03