Toshiba CTX100-S Programming Manual page 155

F
IELD
01 Group Type
02 Trunk Type
03 Private Service Type
04 GCO Key1 Number
06 Pooled Key1 Number
07 Pooled Key2 Number
08 COS
09 FRL
10 QPL
11 Speech/3.1 KHz
12 MOH Source
13 Account Codes
14 Destination
Restriction
15 Credit Cart Calling
16 Send CESID
17 QSIG Sending Type
18 Network COS
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
D
ESCRIPTION
Select the OLG Type.
Possible values: Analog (default) or ISDN
Select the Trunk Type.
Possible values: CO (default) or Tie
TIE Trunk Service Type.
Possible values: Standard (default) or QSIG
Select the first GCO Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
Select first Pooled Line Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
Select second Pooled Line Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
Select Day 1, Day 2 and Night Values.
Possible values: 1~32 (default = 1)
Select Day 1, Day 2 and Night Values.
Possible values: 1~16 (default = 1)
Select Day 1, Day 2 and Night Values.
Possible values: 1~16 (default = 1)
Bearer Capability 3.1 KHz Audio or Speech.
Possible values: Audio (default) or Speech
Select MOH Source.
Possible values: Silence, External1~15 (default = External1)
Enable Trunk forced Account Codes.
Possible values: Enable or Disable (default)
Enable Destination Restriction.
Possible values: Enable or Disable (default)
Enable Credit Card Calling.
Possible values: Enable or Disable (default)
Enable CESID sending.
Possible values: Enable or Disable (default)
Digit sending Mode for QSIG only.
Possible values: Cut Through or Senderized (default = Cut through)
Select Network COS number.
Possible values: 1~32 (default = 1)
Trunks
306 Outgoing Line Groups
6-5