Telephone Button Commands - Toshiba CTX100-S Programming Manual

Telephone Button Commands

1. Use the following buttons to execute the commands:
+ROG
• – Enter.
3DJH 6FUROO
• /
6SNU
• – This delimiter moves cursors between sub-parameter values.
9RO
• – Escape.
sequences.
9RO
• – Back space for line editing.
+ROG
• – Cancel.
• – Use this button between values to specify a range of objects to be programmed (e.g., 1001*1005
enables programming of stations 1001 through 1005).
• – Use this button between values to specify a set of objects to be programmed (e.g.,
1001**1005**1012 enables programming of stations 1001, 1005 and 1012).
• Off-hook – lift and replace the handset to immediately exit programming mode.
2. Keep the following in mind as you maneuver through Strata CTX programs.
• Default and/or current settings are displayed on the telephone LCD with an asterisk.
• Some Strata CTX Programs have more than 20 programmable parameters. To toggle from
parameters
Mode.
• To view parameter options on your telephone LCD, press the desired
3DJH
or button.
• Each parameter shows a number to the left (e.g.,
pressing the number button (in this example
• To enter data, use the number keys.
• To submit your program entry press
• To exit a program press
• To enter the
sign appears in your LCD. Press the
• If you get an error code, press
page B-1 for error code details.
Programming Parameters
Programs can have between one and 40 programmable parameters, each represented by the
The LEDs light up for each
programmed by entering values into the LCD from the telephone button pad.
1. At the SELECT PARAM prompt, press the appropriate
2. Enter the appropriate value from the telephone button pad using the Parameter Fields tables supplied
with each program.
+ROG
3. Press to submit.
4. Press another
+ROG
...or press
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
– Scroll up or down.
9RO
displays as
)% )% )%
~ and ~
+ROG
.
character in your data string press the
+ROG
(twice) to continue programming. See
)%QQ
button that features a programmable parameter. Each parameter is
)%QQ
button to program more parameters
again to program.
9RO
on the LCD. Press
)% 6FUROO
press the or
). Program the desired parameter by
2:DISABLE

) that corresponds to your desired parameter.
+ROG
. To confirm a submitted entry, press
9RO
and the button simultaneously. An
button, then enter the remaining data.
)%QQ
button.
Telephone Button Programming
Telephone Button Overview
to program or in dialing
3DJH
button after entering Program
)%
button and press the
+ROG
again.
"System Error Codes"
)%QQ
6FUROO
on
buttons.
13-3