Toshiba CTX100-S Programming Manual page 454

System Error Codes
System Programming Error Codes
Program Code
19
33
151
49
52
152 33
153
B-4
Sub-
FB
parameter
7
7
7
7
7

-
Error Descriptions
Unable to change the selected BIPU configurations during
updates of selected BIPUs or IPTs to prevent the flash
memory of BIPU from being broken.
The equipment number entered is out of the range.
Slot card type entered is other than BIPU card.
The IP address entered is a global IP address already
assigned to CTX or another BIPU. This restriction is only
applied to the duplication of global IP addresses.
You cannot use 1:10msec in this release.
Common error. See Common Error Code table.
Strata CTX Programming - Part 4: Appendices 11/03