Isdn Trace Location - Toshiba CTX100-S Programming Manual

ISDN Trace Location

This program enables set up of ISDN protocol event trace collection conditions.
Program Number(s): 904
Prerequisite Program:
Reference:
Access Sequence:
Notes
•
Shelf, Slot and Circuit number is entered in "XXYYZZ" format where Shelf is a two digit value from
01~07 corresponding to the Strata CTX Cabinet number, Slot is a two digit value from 01~10
corresponding to the Strata CTX Cabinet's PCB slot number and Circuit is a two digit value from
01~04 corresponding to the Strata CTX PCB Slot's circuit number.
•
Always use circuit 01 for RPTU.
FB Name
LLCI
Layer 3
Layer 2 and 3
State Transitions
Errors
Layer 2 States
)%
1. Press to run a LLCI Trace. Press the
options. Enter 1~3 to determine Trace Level.
)%
2. Press and set CCL3 Trace Level. Press the
options. Enter 1~3 to determine Trace Level.
)%
3. Press and set L2L3 Trace Level. Press the
options. Enter 1~3 to determine Trace Level.
)%
4. Press and set STATE Trace Level. Press the
Detailed options. Enter 1~3 to determine Trace Level.
)%
5. Press and set ERRORS Trace Level. Press the
Detailed options. Enter 1~3 to determine Trace Level.
)%
6. Press and set L2 Trace Level. Press the
options. Enter 1~3 to determine Trace Level.
+ROG
7. Press to execute.
+ROG
8. Press
9. Enter another program number to continue programming or press
mode.
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
None
None
Login to programming mode from your telephone button pad:
+ROG    .
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
At the EQUIP= prompt enter the Shelf, Slot and Port numbers.
FB Summary
01 Level of collecting LLCI values.
02 Level of collecting Layer 3 messages.
03 Level of collecting Layer 2 and Layer 3
messages.
04 Level of collecting State Transitions.
05 Level of collecting errors.
06 Level of collecting Layer 2 States.
to return to the = prompt.
PROG
1:None (no
information)
2:Brief (important
information)
3:Detailled (all
information)
6FUROO 3DJH
or button to view Non, Brief, or Detailed
6FUROO 3DJH
or button to view Non, Brief, or Detailed
6FUROO 3DJH
or button to view Non, Brief, or Detailed
6FUROO 3DJH
or button to view Non, Brief, or
6FUROO 3DJH
or
6FUROO 3DJH
or button to view Non, Brief, or Detailed
Telephone Button Programming
900 Series Programs
Value LCD Prompt
1:NON
2:BRIEF
3:DETAILED
button to view Non, Brief, or
+ROG
again to exit programming
13-101