Bipu Update - Toshiba CTX100-S Programming Manual

Strata ctx digital business telephone systems
Hide thumbs Also See for CTX100-S:
Table of Contents

Advertisement

Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
WinAdmin Menu
IP Telephone:
BIPU Program update
IPT Program update
WinAdmin PC
IP Network-WAN, LAN, VPN, Internet server, VPN Router or Switch Box etc. (not a HUB)
Figure 3
FTP Server (SmartMedia card) Network Connection

BIPU Update

Important!
From the WinAdmin PC or External SmartMedia read\write device
1. "Force format" a SmartMedia card using WinAdmin.
2. Copy the BIPUXXX update file under the SM card PROGRAM folder (XXX is the BIPU firmware
version level).
Note
The firmware update files can be obtained from TSD FYI, click Technical Services > Software
(Strata Systems) > CTX IP Firmware.
To perform the BIPU update from the WinAdmin PC
1. Select Operations > SmartMedia to Make sure the BIPUXXX file is stored on the SM card under the
PROGRAM directory.
Important!
2. Select IP Telephone > BIPU Program Update, then select the BIPU card slot.
Note
Only BIPU-M can be updated. Only BIPU-M card slots will be shown with WinAdmin 2.1F or
higher. The BIPU type selection is not required.
3. Select CTX Internal (SmartMedia) radio button.
An ftp Name and Password is inserted automatically. The IP address of the CTX processor
(SmartMedia card) is also inserted automatically.
4. Data Directory box will be "PROGRAM".
5. From File Name drop down box select "BIPUXXX".
6. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
It could take 1 to 5 minutes to update the BIPU
If an error occurs, recheck file names, locations etc. and try again.
7. After the update is complete, select BIPU Configuration, and check the BIUP version numbers to verify
they have been updated properly.
E-2
CTX Smart Media Card
Program (directory):
BIPUXXX (file)
DIPXXXX (file)
CTX Processor
Complete all
"Prerequisites"
The BIPUs and IPTs will automatically be disabled while Update takes place and return to
the idle state when Update is complete (if they were in the idle state when the Update was
started).
BIPU
on
page E-1
before you do the following.
Strata CTX Programming - Part 4: Appendices 11/03
IPT
IPT
1
16
6784

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctx100Ctx670Strata ctx seriesStrata ctx100-sStrata ctx100Strata ctx670

Table of Contents