Ip Telephone Update - Toshiba CTX100-S Programming Manual

Strata ctx digital business telephone systems
Hide thumbs Also See for CTX100-S:
Table of Contents

Advertisement

Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
11. Press the BIPU reset button for proper initialization.

IP Telephone Update

Important!
Copy the DIPXXXX file into the WinAdmin PC CTXIPUPDATE directory.
Notes
The directory location should be C:\Ctx\W inAdmin\CTXIPUPDATE The drive letter must be
the drive on which WinAdmin is installed.
(XXXX in the DIP file name is the firmware version level of the IP telephone).
From the WinAdmin PC perform the update
Important!
1. Select IP Telephone > IPT Program Update.
2. Select the IPT PDN(s) to be updated.
3. Select Local WinAdmin (radio button).
4. Enter the Windows user login Name and Password.
Note
If in doubt, create a new Window logon User Name and password and use it in Step 6.
5. The IP address of the WinAdmin PC is inserted automatically.
6. Data Directory will be: CTXIPUPDATE
7. From File Name drop down box select: DIPUXXX
8. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
It could take 30 seconds to 2 minutes to update the IP telephone
If an error occurs, recheck file names, locations etc. and try again.
9. Select IP telephone > Station Data. Check the IPT version number to verify that all IPTs have been
updated properly.
10. To check the IP telephone firmware version directly from an IP telephone.
• Simultaneously press the
• At the SELECT = prompt, press
• At the Select function key prompt, press
• To exit this mode, go off and on hook.
Notes
The WinAdmin PC cannot be connected directly to the CTX processor network jack.
All connections must be through the network.
E-6
Complete all
"Prerequisites"
The BIPUs and IPTs will automatically be disabled while Update takes place and return to
the idle state when Update is complete (if they were in the idle state when the Update was
started).
+ROG
on
page E-4
before you do the following.
buttons on the IP Telephone.

+ROG
then press
.
)%
, the IP telephone will be displayed.
Strata CTX Programming - Part 4: Appendices 11/03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctx100Ctx670Strata ctx seriesStrata ctx100-sStrata ctx100Strata ctx670

Table of Contents