Hunt Group - Toshiba CTX100-S Programming Manual

209 Hunt Group

Prerequisite Program:
This command assigns Station Hunting Group data.
1. Complete the "Hunt Group Record
Sheet" on page
2. From the Program Menu, click
Station > Hunt Group. The Station
Hunt Group displays.
3. Click on the Group tab (shown
right).
4. Enter a Group Number for an
existing record
...or click one of the following
buttons:
• List – view a summary list of
programmed Hunt Groups.
• Create – Assign a new Hunt Group with custom settings.
5. Click Submit.
F
IELD
Group Number
01 Hunt Method
02 Pilot Number
04 Number to Display
05 Pilot No. SCFwd
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
200 page 5-1
D-17.
D
ESCRIPTION
Hunt Group Number
Possible values: 1~90 (CTX100), 1~200 (CTX670 Basic),1~640 (CTX670 Exp.)
(default = no value)
Select Hunt Method
Possible values: Distributed (for Voice Mail hunt groups) or Circular (for Multiple DN
hunt groups) (default)
Enter Pilot Directory Number. This is the number that is dialed to call the hunt group.
Possible values: Up to 5 ASCII characters (default = no value) any type of hunt group
can have a pilot number.
Note Any type of hunt group can have a pilot number. Distributed hunt groups must
have a pilot number. Voice Mail hunt groups should be Distributed with a Pilot
Number. Multiple DN Hunt groups should be Circular with no Pilot Number.
Enter the number that is displayed when called by, or when calling any member of the
hunt group.
Possible values: Up to 5 ASCII characters (default = no value)
Note This number should be the DH Group Pilot number for Voice Mail hunt groups.
This number could be the PDN of a Multiple DN Hunt group, in which case the
number would override the number assigned in Program 200, FB15 for PDNs
and Program 206, FB04 for Phantom DNs.
Allows you to assign a System Call Forward pattern to the Pilot Number of a Hunt
Group.
Possible values: 0~4 (CTX100), 0~10 (CTX670 Basic),0~32 (CTX670 Exp.)
(default = 0)
Station
209 Hunt Group
5-25