Toshiba CTX100-S Programming Manual page 149

1. Select Station > Setup Wizard > VMID Range.
2. The VMID Range Setup
Wizard displays (shown at
right).
3. Click Start. The input screen of the VMID Range
Setup Wizard displays (shown at right).
4. Select the type of VMID that should be assigned
to the PDN, PhDN or Pilot DN. Then select the
assignment method and the digits, if any, to be
added to front and/or end of each VMID.
DN range is supported. VMID prefix and/or
Note
suffix are supported.
5. Click Start to submit the settings to the CTX
database.
The result requested displays on the
screen shown at right.
6. (Optional) Click Print to save a hard copy
of the VMID assignment.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
Station
Setup Wizards
5-45