Toshiba CTX100-S Programming Manual page 271

513 SMDR for ILG Assignment
Prerequisite Program:
This program assigns SMDR parameters for ILGs.
F
IELD
00 Incoming Line Group
(ILG)
01 Generate SMDR
Records
02 DNIS Field Indication
03 B Record for Incoming
Call
04 Abandoned Call Record
Output
05 Display Transferred Call
Records
514 SMDR for OLG Assignment
Prerequisite Program:
This command assigns SMDR parameters for OLGs.
F
IELD
00 Outgoing Line Group
(OLG)
02 Outgoing Records
03 Charged Station
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
None
D
ESCRIPTION
Specify the ILG for which to set SMDR parameters.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp.), (default = no value)
Enable to generate records for this ILG
Possible values: Enable (default) or Disable
Check to include DNIS information in records for this ILG.
Possible values: Enable (default) or Disable
Enable B Record generation for incoming calls with or without incoming SMDR
being enabled.
Possible values: Enable or Disable (default)
Enable record generation for abandoned calls. Incoming SMDR must be
turned on. Abandoned call records will be generated whether or not incoming
SMDR has been set.
Possible values: Enable or Disable (default)
Select whether to charge a transferred call to the source or destination party.
Possible values: Source (default) or Destination
None
D
ESCRIPTION
Specify the OLG for which to set SMDR parameters.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp.)
Generate records for outgoing calls. SMDR Record Display must be Enabled.
Possible values: Enable (default) or Disable
Apply the SMDR record of a transferred call to its source or its destination.
Possible values: Source (default) or Destination
Services
Strata Net QSIG Over IP
9-65