Toshiba CTX100-S Programming Manual page 418

Telephone Button Programming
900 Series Programs
FB Name
Control
)%
1. Press
make your selection.
+ROG
2. Press
3. Wait for the
4. Enter another program number to continue programming or press
mode.
Strata CTX SmartMedia Directories
Running the Normal and Forced options of this program creates five directories on the SmartMedia card as
follows:
• Admlog – The Admlog folder saves
• Errlog – System error logs are saved into this folder.
• Evnttrce – Strata CTX WinAdmin Event Trace files are saved into this folder.
• Progdata – Your Strata CTX programmed settings are all saved in this folder.
• Program – The operating software and default data of the Strata CTX is saved in this folder.
When a backup is performed, Strata CTX saves programmed data to the
13-104
.
FB
01 Choose SmartMedia card formatting method:
Normal – creates any Strata CTX SmartMedia
directory that does not exist already. Exiting
directories are not overwritten by this procedure.
Forced – erases any existing directories and files.
All existing data is overwritten. See
SmartMedia Directories
Unmount – writes data into SmartMedia Card.
Always run unmount before removing the
SmartMedia card to prevent damage to the card.
Transfer – writes data from static RAM to
SmartMedia Card.
to enter parameter. Enter
+ROG
to confirm and again to execute.
= prompt to appear before proceeding.
PROG
Summary
Strata CTX
for more information.
 
~ as your command choice. Press the
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Value LCD Prompt
1:Normal 1:NORMAL
2:Forced 2:FORCED
3:Unmount 3:UNMOUNT
4:Transfer 4:TRANSFER
6FUROO 3DJH
or
+ROG
again to exit programming
folder.
Progdata
button to