Toshiba CTX100-S Programming Manual page 360

Telephone Button Programming
200 Series Programs
Table 13-25 Programs 208~218 (continued)
Button Sequence
209 Station Hunting Group
!( C‚yq
,
209-00 Group Number
C‚yq
n,
209-01 Hunt Method
A7 C‚yq
, n,
209-02 Pilot Number
A7! C‚yq
, n,
209-04 Number to Display
A7# C‚yq
, n,
209-05 Pilot No. SCF
A7$ C‚yq
, n,
209-06 Multiple DN Hunt
A7% C‚yq
, n,
209-07 DHG Auto Camp-on
A7& C‚yq
, n, ,
210 Group Call Pickup
!  C‚yq
,
210-00 Primary DN
C‚yq
n,
210- Group 1~32
01~32
A7 —A7"!
, n,
C‚yq
213 ADM Feature Keys
! " C‚yq
,
213-00 PDN+ADM
C‚yq
yyyyyx,
13-46
Value(s)
n = Up to 3 digits
1~90 (CTX100)
1~200 (CTX670 Basic)
1~640 (CTX670 Exp.)
(default = no value)
n = 1. Serial
2. Circular (for Multiple
DN hunt groups)
(default)
3. Distributed (for Voice
Mail hunt groups)
n = Up to 5 digits
n = Up to 5 digits
n = 0~4 (CTX100)
0~10 (CTX670 Basic)
0~32 (CTX670 Exp.)
(default = 0)
n = 1. Enable (default)
2. Disable
n = 1. Enable
2. Disable (default)
C‚yq
n = Up to 5 digits
n = 1. Yes
2. No (default)
C‚yq
,
yyyyy Primary DN (0~99999)
=
ADM (1 or 2)
x =
This command assigns Station Hunting Group data.
Hunt Group Number.
Select Hunt Method.
Enter Pilot Directory Number. This is the number that is dialed to call
the hunt group.
Note Any type of hunt group can have a pilot number. Distributed
hunt groups must have a pilot number. Voice Mail hunt
groups should be Distributed with a Pilot Number. Multiple
DN Hunt groups should be Circular with no Pilot Number.
Enter the number that displays when called by, or when calling any
member of the hunt group.
Note This number should be the DH Group Pilot number for Voice
Mail hunt groups. This number could be the PDN of a Multiple
DN Hunt group, in which case the number would override the
number assigned in Program 200, FB15 for PDNs and
Program 206, FB04 for Phantom DNs.
Allows you to assign a System Call Forward pattern to the Pilot
Number of a Hunt Group.
Enable if hunt group is created for multiple DN operation. Multiple DN
hunt groups should be circular with no pilot number.
Whether to execute Automatic Camp On to the Distributed Hunt
Group or not.
Should be applied to VM Distributed Hunt Groups so callers
automatically camp on to Voice Mail when all VM ports are busy.
Does not apply to Circular or Serial hunt groups.
The Call Pickup Group assignment specifies which group numbers
this station will participate when either the Group Call Pickup or the
Group Directed Call Pickup features are invoked. A user may be
assigned to more than one group.
Enter the Primary DN.
Indicate whether this station is to participate in this Call Pickup group.
Note 01~05 are available for CTX100, 01~10 are available for
CTX670 Basic, and 01~32 are available for CTX670 Exp.
The Feature Key assignment allows each key on the telephone to be
addressed and assigned a code representing the function to be
performed. Some feature keys require additional parameters to
completely define the key. For example, a Phantom DN needs a
directory number, ringing assignment, and the tone pitch when ringing
occurs.
Enter a Primary DN plus an ADM number to Program ADM FBs.
Note FB04 Add on Modules in Program 204 must be set to One or
Two.
Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Summary