Voice Packet Configuration Table Assignment - Toshiba CTX100-S Programming Manual

152 Voice Packet Configuration Table Assignment

This program assigns timing parameters to Prime DNs.
1. From the Program Menu,
click IP-Telephone > Voice
Packet Configuration. The
Voice Packet
Configuration Table
Assignment screen
displays (shown right)
2. Enter Program 152 data.
3. Click Submit.
Important!
• When setting Voice Packet Configuration Tables on an IP QSIG network, the packet table settings
for each node on an end-to-end connection must be the same.
• Whenever Voice Packet Configuration Table changes are made for IP telephones on IP QSIG nodes,
Toshiba recommends pressing the reset button on the BIPU to assure the changes take effect.
F
IELD
Voice Packet Table
Number
01 Voice Packet Trans. Int.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
D
ESCRIPTION
Enter the Voice Packet Configuration Table Number (1-256).
Important! The default values in Voice Packet Table 1 are the recommended
values for G.711 codecs. The default values in Voice Packet Table 2
are the recommended values for G.729A codecs. If the codec selected
for an IP telephone in Program 250-08 is switched from the default
G.711 to G.729A, the table used for the IPT is automatically switched
from Table 1 to Table 2 in Program 250-07. However switching back to
the G.711 requires that you manually switch back to the Table 1 default
parameter settings.
Possible values: 1~128 (CTX100 & CTX670 Basic)
1~256 (CTX670 Exp.)
Voice Packet Transmission Interval – This is depends on the encoding method G711
or G729A. The default setting are G711: 20msec., G729A: 40msec. 10msec. is only
used to test. So don't use 10ms. Normally the default settings provide the best
quality.
If LAN bandwidth is not enough for these parameters and the problem is resolved to
extend the interval according to the LAN requirement, you can change to
G711:40msec. and G729a: 80msec.
Note 30msec. need not be used.
Possible values: 10 msec (available for testing only up to release 200MF008), 20
msec (default), 30 msec, 40 msec or
80 msec
IP Telephone Programming
152 Voice Packet Configuration Table Assignment
Select Voice Packet Table
Number 1 or 2. The default
values will appear in the fields.
6719
8-5